Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 149)

8 • A DMINISTERING THE M ODULE
139
Uploading a Backup File to the Module
The Upload To Module section shows the last uploaded file name and timestamp. It
also allows you to upload a previously backed up file to the module from the client
computer. You can also upload a backup file downloaded from one FactoryTalk
Historian ME to quickly configure another module.
You can only have one backup configuration file on the module at a time. If you
upload an older backup file, it will overwrite any newer backup file.
To upload a backup file to the module:
1. Click [Browse...].
2. Locate the file you want to upload and click [Open].
Backup configuration file paths may not exceed 80 characters, and filenames may
only contain the following characters:
%, @, -, _ , a-z, A-Z, 0-9
3. Click [Upload].
File paths for upload
may not exceed 80
characters