Managing security trusts, E the “managing security trusts” section fo – Rockwell Automation 1756-HIST2G Historian ME 2.1 User Manual
Page 176
F
ACTORY
T
ALK
H
ISTORIAN
ME M
ODULE
U
SER
’
S
G
UIDE
166
Managing Security Trusts
To work with trusts, click Configure Historian in the top navigation bar, then click
the Trust Management option in the left navigation bar. Users typically set up trusts in
Native security mode to allow client applications that do not support FactoryTalk
Security a secure method of accessing the FactoryTalk Historian ME. For
FactoryTalk Historian ME systems that are configured for FactoryTalk Security,
trusts may operate, but they are not required because FactoryTalk Security handles
authentication.
Both default trust and client application trusts can be viewed in the trust table on the
Trust Management page, which displays:
Trust name
Associated user names
IP address information (If the IP Address and Net Mask fields are blank, they
appear as 0.0.0.0.)
Windows account information
Application information