Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 229)

B • D ATA T RANSFER S AMPLE S CENARIO
219
Initiating Data Transfer
To start the transfer of data to the FactoryTalk Historian SE server, select Configure
Historian
from the top navigation bar and then select Data Transfer from the left
navigation bar.
1. Go to the Data Transfer Parameters section and click [Start].
2. The Status section changes from Stopped to Running.
If the FactoryTalk Historian SE server becomes unavailable, the data will continue to
be stored on the module. When the FactoryTalk Historian SE becomes available
again, it will automatically reconnect, and the Data Transfer will continue. The Data
Transfer process makes a copy of the data. It remains on the module and also exists
on the FactoryTalk Historian SE for centrally accessed data and long-term storage.