Rockwell Automation 1794-OF8IH FLEX Isolated Input/Output HART Analog Modules - Manual (Page 19)

7 Publication 1794-UM065B-EN-E - September 2010
Chapter
2
Configurable FLEX I/O Analog Module
Features
Overview Read this chapter to familiarize yourself with configurable features on the
input and output analog modules
HART configurable features described in this chapter include the following
Topic Page
Select Your Analog Input Module Operating
Features 8
Select Your Analog Output Module Operating
Features 10
Understand Image Table Mapping and Bit/Word
Descriptions 13
Chapter Summary 14
Analog/Digital Configurable Features on FLEX I/O Analog I/O Modules
1794-IF8IH Input Module 1794-OF8IH Output Module
Fault Mode Output Enable
High Low Error Level Module Fault State Mode
Input Filter Cutoff Local Fault Mode
Data Format Data Format
Global Reset
Analog Fault State
Latch Retry Mode
Fault Alarm
IMPORTANT
You must use the I/O configuration portion of your PLC programming
software to select and configure these features. This manual assumes
familiarity with the programming software. A brief description of
each module feature is provided here. For more information on your
programming software, refer to the software user manual.