Rockwell Automation 1794-OF8IH FLEX Isolated Input/Output HART Analog Modules - Manual (Page 84)

Publication 1794-UM065B-EN-E - September 2010
72 1794-IF8IH and 1794-OF8IH Configuration
HART Status Fields
The 1794-OF8IH module supports two connections for pass through
messages. Pass through messages provide the ability to send HART messages
to the HART device by passing through the I/O Module. In additional, HART
device information automatically gathered by the I/O module may be accessed
through this interface.
0x44 Channel 4 Format Configuration Error
0x45 Channel 5 Format Configuration Error
0x46 Channel 6 Format Configuration Error
0x47 Channel 7 Format Configuration Error
0x50 Channel 0 Data out of range
0x51 Channel 1 Data out of range
0x52 Channel 2 Data out of range
0x53 Channel 3 Data out of range
0x54 Channel 4 Data out of range
0x55 Channel 5 Data out of range
0x56 Channel 6 Data out of range
0x57 Channel 7 Data out of range
0x80 Module Hardware Failure
0x90 Channel 0 Calibration Error
0x91 Channel 1 Calibration Error
0x92 Channel 2 Calibration Error
0x93 Channel 3 Calibration Error
0x94 Channel 4 Calibration Error
0x95 Channel 5 Calibration Error
0x96 Channel 6 Calibration Error
0x97 Channel 7 Calibration Error
0xA0 Channel 0 Internal Bus Com Error
0xA1 Channel 1 Internal Bus Com Error
0xA2 Channel 2 Internal Bus Com Error
0xA3 Channel 3 Internal Bus Com Error
0xA4 Channel 4 Internal Bus Com Error
0xA5 Channel 5 Internal Bus Com Error
0xA6 Channel 6 Internal Bus Com Error
0xA7 Channel 7 Internal Bus Com Error
Diagnostic Status Value: 0 Channel Failure