Rockwell Automation 1794-OF8IH FLEX Isolated Input/Output HART Analog Modules - Manual (Page 92)

Publication 1794-UM065B-EN-E - September 2010
80 Configure Module Messaging
Select the Attribute Value for the Operation You Want to Perform
CIP message attribute values of 0x74…0x86 are used for HART pass through
messages, values 0x87…0xA6 are used to retrieve additional HART data from
the modules internal database, and attribute 0xA7 is used to reset the
Secondary Input table flag, HART Update, which is bit 5 of the loop status.
Module Data Access Assemblies
Attribute Size
(Words) R/W Description
0x7E 1 R Get HART Channel Status (Dev Info Valid)
0x7F 1 W User -Select Handle For Msg Response Query
0x80 3 R User - Get Message Response Status
0x81 24 R/W HART Pass-through Message Request/Response Buffer
0x82 18 R/W HART Pass-through Message Request/Response Buffer
0x83 12 R/W HART Pass-through Message Request/Response Buffer
0x84 9 R/W HART Pass-through Message Request/Response Buffer
0x85 6 R/W HART Pass-through Message Request/Response Buffer
0x86 4 R/W HART Pass-through Message Request/Response Buffer
0x87 24 R Chan 0 - Get Device Info Block 1
0x88 28 R Chan 0 - Get Device Info Block 2
0x89 8 R Chan 0 - Get Device Info Block 3
0x8A 19 R Chan 0 - Get Device Info Block 4
0x8B 24 R Chan 0 - Get Device Info Block 1
0x8C 28 R Chan 0 - Get Device Info Block 2
0x8D 8 R Chan 0 - Get Device Info Block 3
0x8E 19 R Chan 0 - Get Device Info Block 4
0x8F 24 R Chan 0 - Get Device Info Block 1
0x90 28 R Chan 0 - Get Device Info Block 2
0x91 8 R Chan 0 - Get Device Info Block 3
0x92 19 R Chan 0 - Get Device Info Block 4
0x93 24 R Chan 0 - Get Device Info Block 1
0x94 28 R Chan 0 - Get Device Info Block 2
0x95 8 R Chan 0 - Get Device Info Block 3
0x96 19 R Chan 0 - Get Device Info Block 4
0x97 24 R Chan 0 - Get Device Info Block 1
0x98 28 R Chan 0 - Get Device Info Block 2
0x99 8 R Chan 0 - Get Device Info Block 3
0x9A 19 R Chan 0 - Get Device Info Block 4