Rockwell Automation 1794-OF8IH FLEX Isolated Input/Output HART Analog Modules - Manual (Page 87)

Publication 1794-UM065B-EN-E - September 2010
1794-IF8IH and 1794-OF8IH Configuration 75
Range: 0=Local control of outputs, 1=Adapter controls outputs
Default: 0
Data Table Reference: Fault, EDT write word, bit 14
Run/Prog Range: 0=Processor in PROGRAM mode, 1=Processor in RUN
mode
Default: 0
Secondary Input Data
Table, Cyclic EDT Input
Data The description of this data table section is identical for HART input or
output modules. See Secondary Input Data Table, Cyclic EDT Input Data for
detailed information.
Secondary Data Table Section Created by the Adapter
The description of this data table section is identical for HART input or
output modules. See HART Command 3 Communication Status (8 of 1 bits):
on page 53 for more information.
HART Command 3 Communication Status (8 of 1 bits)
The description of this data table section is identical for HART input or
output modules. See HART Command 3 Communication Status (8 of 1 bits):
on page 53 for more information.
Secondary Data Table Section from Module CEDT Attribute
The description of this data table section is identical for HART input or
output modules.
Status Indicators The module status indicators conforms to the FLEX I/O standard. The
Module will have a single Red & Green indicators for global module
status/power indication.