ClearOne Converge Pro User Manual
Page 100
95
»
Feedback Eliminator Settings:
• Filter Settings: Filters are applied according to the specifications the user sets.
»
Number of Fixed Filters: Up to 16 Fixed Filters are applied. If the specified
number of filters are not required, they become Dynamic Filters.
»
Filter Bandwidth: Bandwidth is determined by the specified Q factor. A lower Q creates a
filter that works across a wider frequency range. A higher Q utilizes a narrower range.
»
Filter Depth Mode:
• Locked re-uses filters. A replacement filter, with new settings and increased filter depth is
applied in place of an existing filter.
• Unlocked adds a new filter at a specific frequency. No filters are replaced, so this setting
will count against the total number of filters available.
»
Mode Settings: Voice and Music presets are available to fine-tune the feedback eliminator.
NOTE: Voice Mode is the more aggressive setting.
»
Enable Ringing Elimination: Allows the Feedback Cancellation to attempt to suppress
ringing.
NOTE: This setting adjusts slowly to eliminate ringing.
3.
Click Close to close the window once the Setup Complete indicator has switched from yellow (in
process) to green (setup complete).