ClearOne Converge Pro - Manual (Page 296)

291
MTRX – Matrix Routing
This command selects/reports the matrix routing of an input to an output.
Command Form: DEVICE MTRX <Src. Ch.> <Src. Gp.> <Dest. Ch.> <Dest. Gp.> [Value]
Argument Type Size Values Units
Source Channel Channel 1 See Groups and Channels -
Source Group Group 1 1, 3, 5, 6, 7, 12, 17, 25, 26
(I, M, P, E, L, F, R, K, Z, U, V)
-
Destination Channel Channel 1 See Groups and Channels -
Destination Group Group 1 2, 5, 6, 12, 16, 20, 25, 26
(H, J, O, P, E, F, T, B, K, D)
-
Value Unsigned Integer 4 0 = Cross point off
1 = Cross point on (Not Valid for Mic
Sources)
2 = Toggle (Not Valid for Mic Sources)
3 = Non Gated (Mic Sources Only)
4 = Gated (Mic Sources Only)
5 = Pre-AEC (Mic Sources Only)
6 = Routing Prohibited (Cross point is
off and may not be turned on)
(Null to query in text)
-
MTRXCLEAR – Clear Matrix
Clears the ENTIRE matrix for the unit. There is no query for this command.
Command Form : DEVICE MTRXCLEAR
No Arguments
MTRXLVL – Matrix Attenuation Adjust
This command selects/reports the matrix level at the cross point.
Command Form:
DEVICE MTRXLVL <Src. Ch.> <Src. Gp.> <Dest. Ch.> <Dest. Gp.> [Value] [A/R]
Argument Type Size Values Units
Source Channel Channel 1 See Groups and Channels -
Source Group Group 1 1, 3, 5, 6, 7, 12, 17, 25, 26
(I, M, P, E, L, F, R, K, Z, U, V)
-
Destination Channel Channel 1 See Groups and Channels -
Destination Group Group 1 2, 5, 6, 12, 16, 25, 26
(H, J, O, P, E, F, T, K, D)
-
Value Signed Float 4 -99.00 – 99.00 **
(Null to query in text)
dB
Absol / Rel 0 A = Absolute
R = Relative
Null = Relative
-
NOTE: Values indicate entry range only. Actual internal range of the matrix attenuation is from
–60 to +12dB, and absolute values are limited to the internal gain range.
MTRXTYPE – Select Pre-AEC Gated or Non-Gated Routing
This command selects whether the Pre-AEC routing is Gated or Non-Gated.
Command Form: DEVICE MTRXTYP <Type>
Argument Type Size Values Units
Type Integer 4 0 = Gated (Default)
1 = Non-Gated
2 = Toggle
(Null to query in text)
-