ClearOne Converge Pro - Manual (Page 327)

322
SERIAL COMMAND SUPPORT TABLE
The following table shows serial command support by the CONVERGE/CONVERGE Pro and the Beamforming
Microphone Array units by device type. Note that Telco-related commands only work on devices that have
telephone interfaces (CONVERGE Pro 880TA, 880T, 840T, TH20); and AEC and NC-related commands do not
work with CONVERGE SR 1212 and SR 1212A.
NOTE: None of the CONVERGE or Beamforming Microphone Array commands are used by
the CONNECT CobraNet or CONNECT AVB units. Likewise, the commands used by
the CONNECT units are not used by the CONVERGE and Beamforming Microphone
Array units. Commands that start with “CNET” are for the CONNECT CobraNet and
commands that start with “AVB” are for the CONNECT AVB and are not included in this
table.
COMMAND NAME
DEVICE
Pro
880
Pro
880T
Pro
840T
Pro 8i
Pro
TH20
SR
1212
880TA
SR
1212A
Pro
VH20
Beam-
forming
Mic Array
AA X X X X
AAMB X X X X X X X
AARINGS X X X X
ACONN X X X X
ACONNLVL X X X X
AD X X X X
ADCLIP X X X X X X X X X
ADPRESENT X X X X X X X X X
AEC X X X X X
AGC X X X X X X X X X
AGCSET X X X X X X X X X
AMBLVL X X X X X X X
AMXDUET X X X X X X X X X
AV X X X X X X X X
AVG X X
AVR X X
AVRT X X
AVT X X
AUDIOMASTER X X X X X X X X X
BAUD X X X X X X X X X
BFLED X
BFMODE X
BFMUTEMACRO X
BFZONE X
CALLDUR X X X X
CALLERID X X X X
CALLSTATUS X
CGROUP X X X X X X X
CHAIRO X X X X X X X
CLEAREFFECT X X X X
CLOCK X X X X X X X X X
COMPDLY X X
COMPDLYEN X X
COMPRESS X X X X X X X
COMPSEL X X X X X X X