ClearOne Converge Pro - Manual (Page 85)

80
• SRTP: Enabling this setting activates encryption on the VH20
• Cipher: This drop-down selects the cipher to be used.
• Null:
• AES CTR:
• AES F8:
• MAC:
• Null
• HMAC SHA180
• HMAC SHA132
• KDR Offer: 0-24
• SRCTP:
• Negotiate
• Enable
• Disable
• VAD: Enables “comfort noise” which simulates background noise found in analog phone lines.
• VAD Noise Matching: Settings are None or Level. Default is Level.
• DTFM Relay: This setting emulates normal key tones on a regular phone when used during a call (for
example, to select options from an in-call menu).
• Payload:
• Codec Priority: Negotiates the best possible codec for each call that both sides can utilize; both units
must have a given codec in order to use it. If the codec is not present, the next one in the list is tried. This
process is repeated until the best match is found. To use the Priority setting, follow the instructions given
in the tab.
Dial Plan
Dial Plan : The Dial Plan consists of numbers and pattern digits for any given telephone number. Since businesses
deal in World-wide calling, this should consist of country codes, access codes, area codes and any combination
of digits that can be dialed. To accommodate this, Dial Plans are required.
• Load from File
• Manual Configuration
Note: After any changes are made, CLICK OK to save all changes!
BEAMFORMING MICROPHONE ARRAY UNIT PROPERTIES
Unit Properties for the Beamforming Microphone Array are accessed identically to any other CONVERGE unit.
When you open the unit properties screen on the Beamforming Microphone Array, there is a Beamforming tab.
When the Unit Properties is opened and the Beamforming tab is selected, there are several different configuration
features available.