ClearOne Converge Pro - Manual (Page 272)

267
CNETADDR – CobraNet Board IP Address
This command selects/reports the IP address of the Ethernet port on the CONNECT CobraNet Bridge board.
Command Form : DEVICE CNETADDR [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
CNETCONDUCTOR – CobraNet Port Is Conductor
This command reports if the CobraNet Port is a Conductor. This command is Query ONLY and may be sent
asynchronously.
Command Form : DEVICE CNETCONDUCTOR [Value]
Argument Type Size Values Units
Value Integer 4 0 = CobraNet Port is NOT a Conductor
1 = CobraNet Port IS a Conductor
(Null to query in text)
-
CNETCONTACT – CobraNet Board Contact
This command sets/reports the assigned contact of the CONNECT CobraNet Bridge board.
Command Form : DEVICE CNETCONTACT [Value]
Argument Type Size Values Units
Value String 54 1 - 54 Characters
(Null to query in text)
-
CNETCPRIO– CobraNet Conductor Priority
This command sets/reports the CobraNet Conductor Priority.
Command Form : DEVICE CNETCPRIO [Value]
Argument Type Size Values Units
Value Integer 4 0 – 255 (Default = 32)
(Null to query in text)
-
CNETLINK– CobraNet Port Is Linked to a Remote CobraNet Device
This command reports if the CONNECT CobraNet Port is currently Linked, Full Duplex, and Receiving Packets.
This command is Query ONLY and may be sent asynchronously.
Command Form : DEVICE CNETLINK [Bit Pattern]
Argument Type Size Values Units
Bit Pattern Integer 4 Bit 0 = CobraNet Port is Linked
Bit 1 = CobraNet Port is Full Duplex
Bit 2 = CobraNet Port is Receiving Packets
(Null to query in text)
-
CNETLOC – CobraNet Board Location
This command sets/reports the assigned location of the CONNECT CobraNet Bridge board.
Command Form : DEVICE CNETLOC [Value]
Argument Type Size Values Units
Value String 54 1 - 54 Characters
(Null to query in text)
-