ClearOne Converge Pro User Manual
Page 90
85
SITE TAB
The Site tab shows a view of the site in the order the CONVERGE Pro units are connected with the Expansion Bus
(E-bus). It displays the configured units in order of connection using the E-bus Link In and Link Out ports.
The Blue line shows the E-Bus connections. The E-bus In is on the left and the E-bus Out is on the right.
The currently selected unit is highlighted in orange. Use the Site pane or select a unit in the blue area to switch to
the desired unit.
Clicking on a button within the unit boundaries will give options for further navigation.
Clicking on the
number
will navigate to the selected Channel View. Click on the
box label
will open the
Group
View
for the channel type.
UNIT TAB
The Unit Tab shows a detailed block diagram for the unit selected in the site pane. The diagram shows the path
of the audio signal based on the current unit configuration, and provides a graphical explanation of each stage of
audio processing.
Accessing the Unit Tab
Console automatically starts in Configuration Mode. When you load a site file, Console displays the Unit tab by
default as shown below. To switch to the Unit tab from any other tab, click the Unit tab on the Tab Bar.