Converge pro vh20 – ClearOne Converge Pro User Manual

Page 357

Advertising
background image

352

CONVERGE PRO VH20

VoIP Features

• VoIP Features
• SIP V2 (RFC 3261 and compananion RFC s)
• Codec Support

»

G.711u

»

G.711A

»

G.722 wideband audio

»

G.729

»

G.723.1

Security Features

• Full Security Capability with TLS, AES, SRTP

Noise Cancellation

• Noise Cancellation 6-15 dB attenuation

Audio Performance

• Conditions: Unless otherwise specified, all

measurements are performed with a 20 Hz to 22 kHz
BW limit (no weighting)

• Frequency Response: 20 Hz to 22 kHz ±1dB Rs=150 Ω
• THD+N: <0.02%
• Dynamic Range: 100 dB (non A-weighted)
• Crosstalk <-91 dB re 20 dBu @ 20 kHz channel to

channel

Line Inputs 1, 2

• Push-on mini-terminal block, balanced, bridging
• Impedance: < 10 KΩ
• Nominal Level: 0 dBu
• Maximum Level: 20 dBu

Line Outputs 1,2

• Push-on mini-terminal block, balanced
• Impedance: < 50 kΩ
• Nominal Level: 0 dBu
• Maximum Level: 20 dBu

Expansion Bus In/Out

• Proprietary Network
• RJ-45 (2), 1.9 Mbps
• Category 5 twisted-pair cable, 200’ maximum cable

length between any two CONVERGE/CONVERGE Pro
devices

Ethernet

• Autoswitching with Quality of Connection (QoC)
• 10/100 Mbps Ethernet Network Port
• 10/100 Mbps Ethernet PC Port
• RJ-45 Connectors

RS-232

• Serial Command Protocol Only (Console software not

supported on RS- 232 port)

• DB-9 female
• 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,

1 stop bit, no parity

• Hardware flow control on (default)/off

USB

• Version 2.0 compatible
• Type: B-connector

Control/Status Ports

• DB-25 female A/B (2)
• Inputs A/B: active low (pull to ground)
• Outputs A/B: open collector, 40 VDC max, 40 mA each
• +3.3 VDC pins (2) (300 mA over-current protected)

Configuration & Administration Software

• CONVERGE

®

Console

Network

• Remote Management & Configuration

»

HTTP web server

»

Telnet Client

»

SMTP Client

»

SNMP Agent

»

DNS

»

DHCP

Power Input Range

• Auto-Adjusting
• 100–240 VAC; 50/60 Hz

Power Consumption

• 30 W Typical

Dimensions (L x D x H)

• 17.25” x 10.25” x 1.75”
• 43.8 x 26 x 4.5 cm

Weight

• 7.5 lbs/3.3375 kg unit weight
• 12 lbs/5.4kg shipping

Operating Temperature

• 14° F/-10° C to 122° F/50° C ambient unit temperature

Approvals

• See Appendix D: Compliance
• AES48-2005: AES standard on interconnections —

Grounding and EMC practices — Shields of connectors
in audio equipment containing active circuitry (self
certified)

Part Number

• 910-151-825 CONVERGE Pro VH20
• Telephone Interface for CONVERGE/CONVERGE

Pro Platform

Advertising