ClearOne Converge Pro - Manual (Page 47)

42
Using the CONVERGE USB as an E-bus Extender
The CONVERGE USB application as an E-bus extender can, for example, be up to 200 feet from the stack, then
re-send the E-bus signals for up to another 200 feet to the next E-bus component.
The following diagram illustrates the use of the CONVERGE USB as an E-bus extender.
CONVERGE USB
CONVERGE Pro Unit
CONVERGE Pro Unit
E-bus
From
LINK Out
E-bus To
LINK In
E-bus
From
LINK Out
E-bus To
LINK In
(Up to 200 Ft. Max. Length) (Up to 200 Ft. Max. Length)
NOTE: Link Channel Selection and routing is NOT required when the CONVERGE USB is used
only as an E-bus extender with no USB Tx/Rx channels used.