ClearOne Converge Pro - Manual (Page 287)

282
GRATIO – Gate Ratio Adjust
This command selects/reports the setting of the gate ratio.
Command Form : DEVICE GRATIO <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 – 50
(Null to query in text)
dB
GREPORT – Gate Report
This command selects/reports the mode of gate and audio presence status reporting.
Command Form : DEVICE GREPORT [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
GRPSEL – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned.
Command Form : DEVICE GRPSEL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Channel 2 See 4 (G) in Groups and Channels
(Null to query in text)
-
HDAEC – Enables/Disables HD AEC mode
This command enables the HD AEC Mode of a Beamforming Microphone Array.
Command Form : DEVICE HDAEC <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Value Unsigned
Short 2 0 = Off
1 = On
2 = Toggle
(Null to Query in Text)
-
HDAECMODE – Set/Report HD AEC mode
This command sets the HD AEC Mode of a Beamforming Microphone Array as Mono or Stereo.
Command Form : DEVICE HDAECMODE <Channel>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Unsigned
Short 1 29 (V)
-
Value Unsigned
Short 2 1 = Mono – One reference per Beamforming Mic
2 = Stereo – Two references per Beamforming Mic
(Null to Query in Text)
-