ClearOne Converge Pro - Manual (Page 298)

293
NOM – Number of Open Microphones Mode
This command selects/reports the setting of Number of Open Microphones (NOM) on output channels.
Command Form : DEVICE NOM <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 2, 16, 25 (J, O, T, K, D) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
NTPSRV – NTP Network Time Server Address
This command selects/reports the IP addresses of the NTP Time Server the unit’s NTP client requests time status
from.
Command Form : DEVICE NTPSRV [Value 1 Value 2]
Argument Type Size Values Units
Value 1 IP Address 4 (Null to query in text) -
Value 2 IP Address 4 -
NULL – Null the Telephone Line
This command nulls the telephone line. There is no query for this command.
Command Form : DEVICE NULL <Channel>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved 2 0 -
OFFA – Off Attenuation Mode
This command selects/reports the off attenuation value of a Mic channel.
Command Form : DEVICE OFFA <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned
Float 2 0.00 – 60.00
(Null to query in text)
-
PAA – PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified Mic.
Command Form : DEVICE PAA <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-