ClearOne Converge Pro - Manual (Page 312)

307
SYSCHECKS – System Checks
Initiates the system checks. There is no query for this command.
The System Check integer bits determine which tests are run. Each bit set generates a separate SYSRESULT
response.
COMMAND FORM : DEVICE SYSCHECKS <System Check>
Argument Type Size Values
System
Check Hexadecimal
Integer 4 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Network
Telephone
Mic 1
Mic 2
Mic 3
Mic 4
Mic 5
Mic 6
Mic 7
Mic 8
All other bits reserved
Packet Loss Statistics
SIP Proxy Registration Status
Power Amp Fault Check
Power Amp Temp Check