ClearOne Converge Pro - Manual (Page 362)

357
CONNECT COBRANET/AVB NETWORK BRIDGES
Digital Audio Channels
• 8 X 8
Sampling Rate
• 48 kHz
Dynamic Range
• >100 dB (non A-weighted)
Power
• LED - Power and Status
• LED - Power and Status
• Input - 100-240V AC @50-60Hz, 0.3A
• Output - 5V DC @1.2A
Connections
• Works with-CONVERGE Pro 840T, 880, 880T,
880TA,8i,TH20, VH20, CONVERGE SR1212,
SR1212A, Beamforming Microphone Array
Expansion Bus In
• 1 port, CAT-5, 200 ft
Expansion Bus Out
• 1 port, CAT-5, 200 ft
CobraNet Port (CONNECT CobraNet) / AVB Port
(CONNECT AVB)
• CAT-5, 328 ft, 10/100 Mbps
Mechanical
• 4.7” x 5.6” x 1.7” (WxHxD)
(11.9cm x 14.3cm x 4.4cm)
Environmental
• Operating Temperature - 32° - 104°F (0° - 40°C)
• Relative Humidity: 0 to 90%
Mounting Options
• Rack Mount (requires 3-unit rack mount plate)
• Tabletop (rubber feet)
• Underside of the table (built-in mounting flanges)
Part Numbers
• 910-151-805: CONNECT CobraNet Network Bridge
• 910-151-804: CONNECT AVB Network Bridge
CONVERGE USB INTERFACE
Power
• Input - 100-240V AC @50-60Hz, 0.3A
• Output - 5V DC @1.2A
Connections
• Works with-CONVERGE Pro 840T, 880, 880T,
880TA,8i,TH20, VH20, CONVERGE SR1212,
SR1212A, Beamforming Microphone Array
Expansion Bus In/Out
• Category 5 twisted-pair cable for 200 feet maximum
cable length between any two CONVERGE devices
USB Audio
• USB 2.0 compatible
• Connector: USB-B
• TX and RX Channel: 24Bit at 48 kHz
Control Status
• Tx/Rx channels selectable by terminal block
jumpers: K/L, M/N, O/P, Q/R
Weight
• 1.51 lbs (0.75 kg)
Mechanical
• 4.7” x 5.6” x 1.7” (WxHxD)
(11.9cm x 14.3cm x 4.4cm)
Environmental
• 14° F/-10° C to 122° F/50° C ambient temperature
Compliance
• RoHS, WEEE
Part Numbers
• 910-151-806: CONVERGE USB