ClearOne Converge Pro - Manual (Page 279)

274
DTONELVL – Dial Tone Level
This command selects/reports the audible dial tone level.
Command Form : DEVICE DTONELVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
DUPDATE – Download Update
This command reports the status of download updates.
Command Form : DEVICE DUPDATE [Channel Group Status Percent Done Message]
Argument Type Size Values Units
Channel Unsigned Integer 1 -
Group Unsigned Integer 1 -
Status Unsigned Integer 1 (Null to query in text) -
Percent Done Unsigned Integer 1 -
Message Char 60 -
DVER – Command Dictionary Version
This command reports the version of the command dictionary being used by the unit. This command is read
only.
Command Form : DEVICE DVER [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 (Sent with a Null in text) -
ENETADDR – Ethernet Port IP Address
This command selects/reports the IP address of the Ethernet port on the unit.
Command Form : DEVICE ENETADDR [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETDHCP – Ethernet DHCP Selection
This command selects/reports the use of DHCP of the Ethernet port on the unit.
Command Form : DEVICE ENETDHCP [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
ENETDNS – Ethernet DNS Selection
This command selects/reports the use of DNS of the Ethernet port on the unit.
Command Form : DEVICE ENETDNS [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-