ClearOne Converge Pro - Manual (Page 265)

260
AGCSET – Automatic Gain Control Adjust
This command selects/reports the settings of the Automatic Gain Control.
Command Form : DEVICE AGCSET <Channel> <Group> [Threshold Target Attack Gain]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 1, 3, 7 (I, M, L) -
Threshold Signed Integer 1 -50 – 0
(Null to query in text)
dB
Target Signed Integer 1 -30 – 20 dB
Response
Time Unsigned Float 2 0.10 – 10.00
S
Gain Unsigned Float 2 0.00 – 18.00 dB
AMBLVL – Ambient Level Adjust
This command selects/reports the ambient level.
Command Form : DEVICE AMBLVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Signed Float 2 -80.00 – 0.00
(Null to query in text)
dB
AMXDUET – Use AMX Duet Discovery
This command sets and reports the status of AMX Duet Discovery.
Command Form : DEVICE AMXDUET [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = toggle
(Null to query in text)
-
AUDIOMASTER – Expansion Bus Audio Master Mode
This command reports the mode of the unit for control of the expansion bus audio.
Command Form : DEVICE AUDIOMASTER [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 1 = Master
2 = Slave
(Null to query in text)
-
AV – Adaptive Volume
This command enables/disables adaptive volume tracking on a power amplifier channel.
Command Form : DEVICE AV <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Signed Float 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-