ClearOne Converge Pro - Manual (Page 269)

264
BFBINFO – Beamforming Array Beam Information
This command reports the given Beamforming Array’s current active beams. This command is read only.
Command Form : DEVICE BFBINFO [Value]
Argument Type Size Values Units
Value Integer 4 String with binary representation of the status of the eight
(maximum future #) beams.
0 = Beam Inactive
1 = Beam Active
(Null to Query in Text)
-
BFMODE – Sets/Reports Beamforming Mic Mode
This Sets the Beamforming Mic to Table Top, Wall Mount, Ceiling Mount, or Auto (Let the Beamforming Mic
decide).
Command Form : DEVICE BFMODE <Channel> <Group> <Value>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Value Integer 2 1 = Auto (Default)
2 = Table Top
3 = Ceiling Mount
4 = Wall Mount
(Null to Query in Text)
-
BFPOS – Beamforming Array Position in Auto Mode
This command reports the given Beam Former Array’s Position if the BFMODE is Auto. This command is read
only.
Command Form : DEVICE BFPOS [Value]
Argument Type Size Values Units
Value Integer 4 2 = Table Top
3 = Ceiling Mount
4 = Wall Mount
(Null to Query in Text)
-
BFZONE – Manually Disables/Enables Beamforming Mic Zones
For each Mode of a Beamforming Mic manually Enable or Disable each of the Mic Zones.
Command Form : DEVICE BFZONE <Channel> <Group> [Zone 1] [Zone 2] [Zone 3] [Zone 4] [Zone 5] [Zone 6]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Zone 1 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 2 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 3 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 4 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 5 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 6 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-