ClearOne Converge Pro User Manual
Page 101
96
• Noise Gate: This feature reduces buzz and hum from the amp when the system is on but not in use.
1.
Enable Noise Gate: Enables or Disables the feature.
»
Mode:
• Adaptive: Actively monitors the noise floor of the environment and determines when to enable
gating.
• Manual: User sets Threshold.
»
Timer: Time before the Amp begins gating.
NOTE: The Noise Floor must be at the Threshold Level for the duration set in the Timer in order
to enable the Noise Gate.
»
Filter:
• None: No filtering is applied to noise.
• High Pass: A High Pass filter is applied to noise before threshold reading.
• Low Pass: A Low Pass filter is applied to suppress noise before threshold reading.
• High/Low Pass: High and Low Pass filtering is applied to noise before threshold reading.