ClearOne Converge Pro - Manual (Page 353)

348
CONVERGE PRO 840T (continued)
Ethernet
• Autoswitching with Quality of Connection (QoC)
• 10/100 Mbps Ethernet Network Port
• 10/100 Mbps Ethernet PC Port
• RJ-45 Connectors
RS-232
• Serial Command Protocol Only (Console software not
supported on RS- 232 port)
• DB-9 female
• 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,
1 stop bit, no parity
• Hardware flow control on (default)/off
USB
• Version 2.0 compatible
• Type: B-connector
Control/Status Ports
• DB-25 female A/B (2)
• Inputs A/B: active low (pull to ground)
• Outputs A/B: open collector, 40 VDC max, 40 mA each
• +3.3 VDC pins (2) (300 mA over-current protected)
Configuration & Administration Software
• CONVERGE Console
Power Input Range
• Auto-Adjusting
• 100–240 VAC; 50/60 Hz
Power Consumption
• 30 W Typical
Dimensions (L x D x H)
• 17.25” x 10.25” x 1.75”
• 43.8 x 26 x 4.5 cm
Weight
• 7.5 lbs/3.3375 kg unit weight
• 12 lbs/5.4kg shipping weight
Operating Temperature
• 14° F/-10° C to 122° F/50° C ambient unit temperature
Approvals
• See Appendix D: Compliance
• AES48-2005: AES standard on interconnections —
Grounding and EMC practices — Shields of connectors
in audio equipment containing active circuitry (self
certified)
Part Number
910-151-840 Converge Pro 840T
4-Channel AEC Microphone Mixer with Telephone Hybrid and
10W Amplifier