ClearOne Converge Pro - Manual (Page 273)

268
CNETMAC – CobraNet Board MAC Address
This command reports the MAC Address of the CONNECT CobraNet Bridge board. This command is Query
ONLY.
Command Form : DEVICE CNETMAC [Value]
Argument Type Size Values Units
Value String 20 “xx:xx:xx:xx:xx:xx”
NULL terminated MAC address
-
CNETNAME – CobraNet Board Name
This command sets/reports the assigned name of the CONNECT CobraNet Bridge board.
Command Form : DEVICE CNETNAME [Value]
Argument Type Size Values Units
Value String 54 1 - 54 Characters
(Null to query in text)
-
CNETRXBNUM – CobraNet Rx Bundle Number
This command sets/reports the CobraNet Rx Bundle Number. Set to lowest value if bundle type is selected.
Command Form : DEVICE CNETRXBNUM <Receiver> [Value]
Argument Type Size Values Units
Receiver Integer 4 1 – 4 Cobra Net Receiver Number -
Value Integer 4 0 = Default
1 – 255 if Multicast
256 – 65535 if Unicast
(Null to query in text)
-
CNETRXSTATUS – CobraNet Rx Bundle Status
This command reports the CobraNet Rx Bundle Status (audio presence) for all 8 channels. This command is
Query ONLY and may be sent asynchronously.
Command Form : DEVICE CNETRXSTATUS <Receiver> [Value]
Argument Type Size Values Units
Receiver Integer 4 1 – 4 Cobra Net Transmitter Number -
Value Bit Map Rx Status 4 XXXX XXXX
|||| ||||---- Channel 1
|||| |||----- Channel 2
|||| ||------ Channel 3
|||| |------- Channel 4
||||--------- Channel 5
|||---------- Channel 6
||----------- Channel 7
|------------ Channel 8
For each bit: 0 = No Signal
1 = Signal
(Null to query in text)
Value