ClearOne Converge Pro - Manual (Page 183)

178
GATING TAB
The Gating tab allows you to create gating groups and assign mic inputs to gating groups.
Gating group assignments combine individual channel gating configurations created using the Channel
Properties Configuration screen. When inputs are assigned to a gating group, the gating information from the
assigned inputs is used to control how the entire mixer behaves.
The CONVERGE/CONVERGE Pro product family (excluding the TH20/VH20) features four internal gating groups
(Internal 1–4), and six global gating groups across the expansion bus (Global A–F). Mic inputs are assigned
to Global Group A by default. If an input is not assigned to a gating group, that mic’s gating properties are
independent, and they have no effect on any gating group. When gating groups span two or more units (global
gating groups), the settings must be the same for each unit attached to the global gating group.
NOTE: Mic inputs can be assigned to one and only one Gating Group at a time.
Accessing Gating Groups
To access gating groups, click the Gating Tab on the Tab Bar in Console.
Gating configurations are shown in the Center Pane. The following sections describe how to configure gating
groups.