ClearOne Converge Pro - Manual (Page 155)

150
Channel Routing Matrix: Telco/VoIP TX
The graphic below shows the Telco/VoIP Tx channel routing matrix.
All inputs from Exp. O, and from Exp. S are selected as cross points and the first four inputs are gated by default.
Clicking a cross point box selects it, clicking it a second time sets the cross point, as indicated by a colored box.
The dB level for set cross points is shown numerically in the box.
To adjust cross point gain/attenuation, right-click on a cross point box and select Cross Point from the shortcut
menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.