ClearOne Converge Pro - Manual (Page 320)

315
XGMODE – Gating Mode
This command selects/reports the setting of gating mode. This command can be used to replace the GMODE
command for the M group.
Command Form : DEVICE XGHOLD <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0.10 – 8.00
(Null to query in text)
-
XGOVER – Gating Override
This command selects/reports the setting of gating override. This command can be used to replace the GOVER
command for the M group.
Command Form : DEVICE XGOVER <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XGRATIO – Gate Ratio Adjust
This command selects/reports the setting of the gate ratio. This command can be used to replace the GRATIO
command for the M group.
Command Form : DEVICE XGRATIO <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 – 50
(Null to query in text)
dB
XGRPSEL – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned. This command can be used
to replace the GRPSEL command for the M group.
Command Form : DEVICE XGRPSEL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 See 4 (G) in Group and Channels
(Null to query in text)
-
XHOOK – Hook Flash
This command sends a hook flash. This command can be used to replace the HOOK command for the R group.
There is no query for this command.
Command Form : DEVICE XHOOK <Channel> <Group> <Reserved>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -