ClearOne Converge Pro - Manual (Page 281)

276
ENETVLANPRI – VLAN Priority
This command sets/reports the VLAN Tagging Priority for all IP packets. Valid on VH20 ONLY. Change requires
reboot to become effective.
Command Form : DEVICE ENETVLANPRI [Value]
Argument Type Size Values Units
Value Unsigned
Integer 4 0 – 7
(Null to query in text)
-
EREF – Expansion Bus Reference
This command selects an output or reports which output is the expansion bus reference.
Command Form : DEVICE EREF <Channel> [Value Channel Value Group]
Argument Type Size Values Units
Channel Channel 1 See Reference Channels in Groups and Channels -
Group Group 1 8 (A, E) -
Value Channel 1 0 = none
See 2, 20 (O, B) in
Groups and Channels
(Null to query in text)
-
Value Group 1 0 for none or 2, 20 (N for none or O, B) -
EVENT – Run Scheduled Event
This command manually runs a scheduled event on a unit. There is no query associated with this command.
Command Form : DEVICE EVENT <Channel> <Group>
Argument Type Size Values Units
Channel Channel 1 1 - 10 -
Group Group 1 21 (Q) -
Reserved Unsigned Short 2 0 -
FE – Feedback Elimination Enable
This command enables or disables feedback elimination on the power amplifier channel.
Command Form : DEVICE FE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 = On
1 = Off
2 = Toggle
(Null to query in text)
-
FEB – Feedback Elimination Bandwidth
This command sets the filter bandwidth of the notch filter. Options are a Q = 5 or Q = 10
Command Form : DEVICE FEB <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 = 5
1 = 10
Default 0 (5)
(Null to query in text)
-