ClearOne Converge Pro - Manual (Page 172)

167
MATRIX TAB
The Matrix Tab is used to route audio to one or more destinations (outputs, expansion bus, processing, or fader
channels) and to create cross points between channels.
Accessing the Matrix
To access the matrix, select the Matrix Tab from the Tab Bar in Console.
The matrix appears with the current routing configuration displayed for all channels. The functionality of the matrix
screen is described in the following sections.
Routing Legend
The routing legend shows the status of cross points using colored cells that mark the intersection or cross point of
the routing from input to output. The color of the cross point cell identifies the input type:
• Yellow = gated mic input
• Blue = non-gated mic input
• Brown = pre-AEC
• Green = cross point
NOTE: The current audio level to the nearest dB is shown in cross point cells.
Black cell are restricted routing paths which prevent Telco, E-Bus, Processing, and Fader channels from being
routed back to themselves.