ClearOne Converge Pro - Manual (Page 373)

368
<vlan_enable>
1 to 4096 enable with this VLANID, 0 – disable VLAN
<vlan_priority>
priority of vlan packets range: 0-7
<qos_precedence>
set quality of service precedence range: 0-8
0 0x0
1 0x8
2 0x10
3 0x18
4 0x20
5 0x28
6 0x30
7 0x38
8 allows a custom value to be specified by qos_custom_dscp.
See qos_custom_dscp below.
<qos_custom_dscp>
A custom value of QOS precedence range 0- 0x39
See qos_precedence above
<auto_answer>
1 - enable 0 - disable
<rtp_base_port>
range 1024 to 65535
<user_domain index=n>
default -to use the current domain name
proxy -to use the proxy address
[ Fully qualified domain name ] -to specify a domain name
<tls_cert_update index=n>
1 - always update the tls filename and data
2 - if the file name is not present, then request the file data
<tls_private_cert index=n>
file name of private key to load
<tls_local_cert index=n>
file name of local certificate to load
<tls_ca_cert index=n>
comma seperated list of up to 5 CA certificate filenames to be loaded.
<rtcp_enable>
1 - enable 0 - disable
<srtp_enable>
1 - enable 0 - disable
<srtp_cipher>
1 - AES_CM_128
2 - FS_128
<srtp_mac>
1 - HMAC_SHA1_80
2 - HMAC_SHA1_32
<strp_kdr>
set KDR offer range 0 - 24
<srtcp_enable>
1 - enable 0 - disable