ClearOne Converge Pro - Manual (Page 283)

278
FEM – Feedback Elimination Mode
This command set the feedback mode to either Music or Voice. This effects how aggressive the reduction is.
Command Form : DEVICE FEM <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Float 2 0 = Locked
1 = Unlocked
Default 0
(Null to query in text)
-
FEN – Feedback Elimination Nodes
This command reports the total number of filter nodes (fixed and dynamic) currently being used for the feedback
cancellation. This is a query only command.
Command Form : DEVICE FEN <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Short 2 Total Nodes
(ALWAYS NULL IN TEXT)
-
FER – Feedback Elimination Node Reset
This command resets both the fixed and dynamic filters on the feedback eliminator. There is no query
associated with this command.
Command Form : DEVICE FER <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Short 2 Zero -
FERNG – Feedback Elimination Ring Elimination Mode
This command enables/disables the Ring Elimination Mode on the feedback eliminator.
Command Form : DEVICE FERNG <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Reserved Zero 2 0 = 0ff
1 = On
2 = Toggle
(Null to query in text)
-
FES – Feedback Elimination Setup
This command reset the feedback eliminator and initiates an automatic training cycle. When the automatic setup
is complete, the FESC (Feedback Elimination Setup Complete) command will be issued. There is no query
associated with this command.
Command Form : DEVICE FES <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Reserved Zero 2 Zero -