ClearOne Converge Pro - Manual (Page 139)

134
As shown above, the center pane displays a signal flow diagram for the Telco/VoIP Rx channel, real-time peak-level
meters, as well as a channel routing matrix that displays the audio routing configuration for the channel. Note that
the meters and configuration controls are shown at the appropriate point in the signal path.
The following sections describe how to use these controls (in order from left-to-right and top-to-bottom as they
appear in the signal flow) to configure the Telco receive channel settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional). Labels are shown throughout Console
wherever the channel is referenced.
Channel Configuration Buttons
The Channel Configuration Buttons enable you to configure settings for the Telco/VoIP Rx channel. With the
exception of the Mute, ClearEffect™, and ALC buttons, which toggle their respective functions and have no user-
configurable settings, clicking a channel configuration button displays the Channel Property Configuration window
as shown below.
The window contains three tabs: NC (Noise Cancellation), Telco Settings, and Telco Meters, which are
described in the following sections.