ClearOne Converge Pro - Manual (Page 317)

312
XCALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command can be used to replace the CALLERID
command for the R group. This command is reportable only. It cannot be queried or set.
Command Form : DEVICE XCALLERID <Channel> <Group> <Duration>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Duration String 8 String of format HR:MN:SS -
XCHAIRO – Chairman Override Mode
This command selects/reports the setting of chairman override. This command can be used to replace the
CHAIRO command for the M group.
Command Form : DEVICE XCHAIRO <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XCGROUP – Compressor Group
This command sets the compressor group for synchronized operation of the compressor. This command can be
used to replace the CGROUP command for the P group.
Command Form : DEVICE XCGROUP <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5, 23 (P, J) -
Value Unsigned Short 2 0 = None
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
(Null to query in text)
-
XCOMPRESS – Compressor Adjust
This command controls/reports the signal compression setting on a Channel. This command can be used to
replace the COMPRESS command for the P group.
Command Form : DEVICE XCOMPRESS <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J, P) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-