Dell POWEREDGE M1000E - Manual (Page 100)

80 Fabric OS MIB Reference
53-1002750-01
fcFeStatus group
4
fcFeStatus group
This group consists of tables that contain operational status and established service parameters
for the fabric element and the attached Nx_Ports.
fcFxPortRxBufSize
1.3.6.1.2.1.75.1.1.5.1.6 Read only The largest Data_Field Size (in octets) for an FT_1 frame that can be
received by the Fx_Port.
fcFxPortRatov
1.3.6.1.2.1.75.1.1.5.1.7 Read only The Resource_Allocation_Timeout value configured for the Fx_Port.
This is used as the time-out value for determining when to reuse an
Nx_Port resource such as a Recovery_Qualifier. It represents
E_D_TOV (Refer to
“fcFxPortEdtov” on page 80) plus twice the
maximum time that a frame might be delayed within the fabric and
still be delivered.
fcFxPortEdtov
1.3.6.1.2.1.75.1.1.5.1.8 Read only The E_D_TOV value configured for the Fx_Port. The
Error_Detect_Timeout value is used as the time-out value for
detecting an error condition.
fcFxPortCosSupported
1.3.6.1.2.1.75.1.1.5.1.9 Read only A value indicating the set of Classes of Service supported by the
Fx_Port.
fcFxPortIntermixSupported
1.3.6.1.2.1.75.1.1.5.1.10 Read only A flag indicating whether the Fx_Port supports an Intermixed
Dedicated Connection.
Valid values:
•
1 - true
•
2- false
fcFxPortStackedConnMod
e
1.3.6.1.2.1.75.1.1.5.1.11 Read only A value indicating the mode of Stacked Connect supported by the
Fx_Port.
Valid values:
•
1 - none
•
2 - transparent
•
3 - locked down
fcFxPortClass2SeqDeliv
1.3.6.1.2.1.75.1.1.5.1.12 Read only A flag indicating whether Class 2 Sequential Delivery is supported by
the Fx_Port.
Valid values:
•
1 - true
•
2- false
fcFxPortClass3SeqDeliv
1.3.6.1.2.1.75.1.1.5.1.13 Read only A flag indicating whether Class 3 Sequential Delivery is supported by
the Fx_Port.
Valid values:
•
1 - true
•
2- false
fcFxPortHoldTime
1.3.6.1.2.1.75.1.1.5.1.14 Read only The maximum time (in microseconds) that the Fx_Port holds a frame
before discarding the frame if it is unable to deliver the frame. The
value 0 means that the Fx_Port does not support this parameter.
The formula used to calculate this object is (RATOV - EDTOV - (2 *
WAN_TOV)) / (MAX_HOPS + 1)) / 2).
TABLE 27
Object and OID Access Description