Swfcporttype, Swfcportphystate, Swfcportopstatus – Dell POWEREDGE M1000E User Manual

Page 173: Swfcportadmstatus

Advertising
background image

Fabric OS MIB Reference

153

53-1002750-01

Fibre Channel port group

6

swFCPortType
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.2

Read only

The type of ASIC for the switch port.
Possible values are:

•

stitch (1)

•

flannel (2)

•

loom (3) (Brocade 2000 series)

•

bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000,
24000)

•

rdbloom (5)

•

wormhole (6)

•

other (7) (Valid value for Brocade 200E, 4012, 4100, 4900,
7500, 7600, 48000, 300, 5100 and 5300)

•

unknown (8)

swFCPortPhyState
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.3

Read only

The physical state of the port.
Possible values are:

•

noCard (1) - No card is present in this switch slot.

•

noTransceiver (2) - No Transceiver module in this port
(Transceiver is the generic name for GBIC, SFP, and so on).

•

laserFault (3) - The module is signaling a laser fault (defective
GBIC).

•

noLight (4) - The module is not receiving light.

•

noSync (5) - The module is receiving light but is out of sync.

•

inSync (6) - The module is receiving light and is in sync.

•

portFault (7) - The port is marked faulty (defective GBIC, cable, or
device).

•

diagFault (8) - The port failed diagnostics (defective G_Port or
FL_Port card or motherboard).

•

lockRef (9) - The port is locking to the reference signal.

•

validating (10) - The module is being validated.

•

invalidModule (11) - The module is invalid.

•

noSigDet (14) - No Signal is detected in the port.

•

unknown (255) - The module is unknown.

swFCPortOpStatus
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.4

Read only

The operational status of the port.
Possible values are:

•

unknown (0) - The port module is physically absent.

•

online (1) - User frames can be passed.

•

offline (2) - No user frames can be passed.

•

testing (3) - No user frames can be passed.

•

faulty (4) - The port module is physically faulty.

swFCPortAdmStatus
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.5

Read-write The desired state of the port. A management station might place the

port in a desired state by setting this object accordingly.
Based on the port status, this OID returns one of the following:

•

Online - When queried port is online.

•

Offline - When queried port is offline.

•

Faulty - When port is in faulty state.

The following values can be used to set this object:

•

Online - To change port's state to Online.

•

Offline - To change port's state to Offline.

TABLE 50

Object and OID

Access

Description

Advertising