Dell POWEREDGE M1000E - Manual (Page 232)

212 Fabric OS MIB Reference
53-1002750-01
Connectivity unit group
9
connUnitSensorInfo
1.3.6.1.3.94.1.8.1.5 Read only Miscellaneous static information about the sensor, such as its serial
number.
Each contains textual information about the sensor.
Returns the serial ID if this is for the power supply; otherwise, returns
Null.
connUnitSensorMessage
1.3.6.1.3.94.1.8.1.6 Read only This describes the status of the sensor as a message. It may also
provide some information about the sensor, for example:
sensor 1: type 3 is OK, value is 33
Each contains the sensor status (and reading if applicable) in textual
format.
connUnitSensorType
1.3.6.1.3.94.1.8.1.7 Read only The type of component being monitored by this sensor.
Possible values are:
•
unknown (1)
•
other (2)
•
battery (3)
•
fan (4)
•
power-supply (5)
•
transmitter (6)
•
enclosure (7)
•
board (8)
•
receiver (9)
The following mapping is for each individual sensor, where applicable:
swSensorType connUnitSensorType
1 (temperature) 8 (board)
2 (fan) 4 (fan)
3 (power supply) 5 (power supply)
connUnitSensorCharacte
ristic
1.3.6.1.3.94.1.8.1.8 Read only The characteristics being monitored by this sensor.
The following mapping is for each individual sensor, where applicable:
swSensorType connUnitSensorCharacteristic
1 (temperature) 3 (temperature)
2 (fan)
7 (airflow)
3 (power supply) 9 (power)
Possible values are:
•
unknown (1)
•
other (2)
•
temperature (3)
•
pressure (4)
•
emf (5)
•
currentValue (6) Current is a keyword.
•
airflow (7)
•
frequency (8)
•
power (9)
•
door (10) - Not supported in Fabric OS v2.6.1.
connUnitPortTable
1.3.6.1.3.94.1.10 Not
accessible Generic information on ports for a specific connUnit
NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i
blade is not supported.
TABLE 75
Object and OID Access Description