Dell POWEREDGE M1000E - Manual (Page 121)

Fabric OS MIB Reference 101
53-1002750-01
fcFeCap group
4
fcFeCap group
This group consists of a table describing information about what each Fx_Port is inherently capable
of operating or supporting. A capability might be used or not, as expressed in its respective object
value in the configuration group.
Implementation of this group is optional.
TABLE 36
Object and OID Access Description
fcFxPortCapTable
1.3.6.1.3.42.2.1.5.1 Not
accessible A table that contains one entry for each Fx_Port, and the capabilities of
the port within the fabric element.
fcFxPortCapEntry
1.3.6.1.3.42.2.1.5.1.1 Not
accessible An entry containing the capabilities of a Fx_Port.
fcFxPortCapModuleIndex
1.3.6.1.3.42.2.1.5.1.1.1 Read only Identifies the module containing the Fx_Port for which this entry
contains information.
fcFxPortCapFxPortIndex
1.3.6.1.3.42.2.1.5.1.1.2 Read only Identifies the Fx_Port within the module. This number ranges from 1 to
the value of fcFeModulePortCapacity for the associated module. The
value remains constant for the identified Fx_Port until the module is
re-initialized.
fcFxPortCapFcphVersionH
igh
1.3.6.1.3.42.2.1.5.1.1.3 Read only The highest or most recent version of FC-PH that the Fx_Port is capable
of supporting.
fcFxPortCapFcphVersionL
ow
1.3.6.1.3.42.2.1.5.1.1.4 Read only The lowest or earliest version of FC-PH that the Fx_Port is capable of
supporting.
fcFxPortCapBbCreditMax
1.3.6.1.3.42.2.1.5.1.1.5 Read only The maximum number of receive buffers available for holding Class 1
connect-request Class 2 or Class 3 frames from the attached Nx_Port.
fcFxPortCapBbCreditMin
1.3.6.1.3.42.2.1.5.1.1.6 Read only The minimum number of receive buffers available for holding Class 1
connect-request Class 2 or Class 3 frames from the attached Nx_Port.
fcFxPortCapRxDataFieldSi
zeMax
1.3.6.1.3.42.2.1.5.1.1.7 Read only The maximum size (in bytes) of the Data Field in a frame that the
Fx_Port is capable of receiving from its attached Nx_Port.
fcFxPortCapRxDataFieldSi
zeMin
1.3.6.1.3.42.2.1.5.1.1.8 Read only The minimum size (in bytes) of the Data Field in a frame that the
Fx_Port is capable of receiving from its attached Nx_Port.
fcFxPortCapCos
1.3.6.1.3.42.2.1.5.1.1.9 Read only A value indicating the set of Classes of Service that the Fx_Port is
capable of supporting.
fcFxPortCapIntermix
1.3.6.1.3.42.2.1.5.1.1.10 Read only A flag indicating whether the Fx_Port is capable of supporting the
intermixing of Class 2 and Class 3 frames during a Class 1 connection.
This flag is only valid if the port is capable of supporting Class 1
service.
Valid values:
•
yes (1)
•
no (2)
fcFxPortCapStackedConn
Mode
1.3.6.1.3.42.2.1.5.1.1.11 Read only A value indicating the mode of Stacked Connect request that the
Fx_Port is capable of supporting.