Dell POWEREDGE M1000E - Manual (Page 73)

Fabric OS MIB Reference 53
53-1002750-01
ifMIB group
2
ifHCOutMulticastPkts
1.3.6.1.2.1.31.1.1.1.12 Read only The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent. For a MAC
layer protocol, this includes both Group and Functional addresses.
This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in
the value of this counter can occur at re-initialization of the
management system, and at other times as indicated by the value of
ifCounterDiscontinuityTime
NOTE: This object is not supported.
ifHCOutBroadcastPkts
1.3.6.1.2.1.31.1.1.1.13 Read only The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a broadcast address at this
sub-layer, including those that were discarded or not sent. This object
is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value
of this counter can occur at re-initialization of the management
system, and at other times as indicated by the value of
ifCounterDiscontinuityTime.
NOTE: This object is not supported.
ifLinkUpDownTrapEnable
1.3.6.1.2.1.31.1.1.1.14 Read-write Indicates whether linkUp or linkDown traps should be generated for
this interface. By default, this object should have the value enabled
(1) for interfaces which do not operate on any other interface (as
defined in the ifStackTable), and disabled (2) otherwise.
ifHighSpeed
1.3.6.1.2.1.31.1.1.1.15 Read only An estimate of the current operational speed of the interface in
millions of bits per second. A unit of 1000 equals 1,000,000 bps.
For 1 Gbps, the value is 1000.
For 2 Gbps, the value is 2000.
For 4 Gbps, 8 Gbps, 10 Gbps, and 16 Gbps, the value is 16000.
ifPromiscuousMode
1.3.6.1.2.1.31.1.1.1.16 Read-write This object has a value of false(2) if this interface only accepts
packets or frames that are addressed to this station. This object has a
value of true(1) when the station accepts all packets or frames
transmitted on the media. The value true(1) is only legal on certain
types of media. If legal, setting this object to a value of true(1) may
require the interface to be reset before becoming effective. The value
of ifPromiscuousMode does not affect the reception of broadcast and
multicast packets or frames by the interface.
Hard-coded to false.
ifConnectorPresent
1.3.6.1.2.1.31.1.1.1.17 Read only Set to true when media is connected, otherwise false. For virtual FC
ports, it is always false.
TABLE 16
Object and OID Access Description