Dell POWEREDGE M1000E - Manual (Page 357)

Fabric OS MIB Reference 337
53-1002750-01
BD configuration
19
BD configuration
The OID represents the Bottleneck configuration.
NOTE
When alerting is never enabled in the lifetime of the daemon, junk values are expected for
alert-related parameters.
When alerting is enabled before being disabled, non-junk values are expected for alert-related
parameters.
BD statistics
This OID represents the BD statistics.
TABLE 132
Object and OID Access Description
bdStatus
1.3.6.1.4.1.1588.2.1.1.51.1.1 Read only This object represents the status of bottleneck detection
feature if enabled in the switch.
Valid values:
•
true (1)
•
false (2)
bdLThreshold
1.3.6.1.4.1.1588.2.1.1.51.1.2 Read only This object is the severity threshold for latency bottleneck.
This threshold indicates the percentage of one-second
intervals affected by latency conditions within a specified
time window. The value of this OID is between 0 and 1.
bdCThreshold
1.3.6.1.4.1.1588.2.1.1.51.1.3 Read only This object is the severity threshold for congestion
bottleneck. This threshold indicates the percentage of
one-second intervals affected by congestion conditions
within a specified time window. The value of this OID is
between 0 and 1.
bdQTime
1.3.6.1.4.1.1588.2.1.1.51.1.4 Read only The minimum number of seconds between consecutive
alerts. The value assigned to this parameter applies to
both latency and congestion monitoring. In this duration,
there will not be any traps sent.
bdWinAvgTime
1.3.6.1.4.1.1588.2.1.1.51.1.5 Read only The time window in seconds over which the percentage of
seconds affected by bottleneck conditions is computed
and compared with the threshold.
bdThreshold
1.3.6.1.4.1.1588.2.1.1.51.1.6 accessible-for-notify This object represents the threshold for BD.
This is accessible only for bdTrap and bdClearTrap.
nBdType
1.3.6.1.4.1.1588.2.1.1.51.1.7 accessible-for-notify This object represents the BD type.This is accessible only
for bdTrap and bdClearTrap.