Dell POWEREDGE M1000E - Manual (Page 129)

Fabric OS MIB Reference 109
53-1002750-01
Physical entity group
5
entPhysicalContainedIn
1.3.6.1.2.1.47.1.1.1.1.4 Read only The value of entPhysicalIndex for the physical entity that “contains” this
physical entity. A value of 0 indicates this physical entity is not
contained in any other physical entity. Note that the set of containment
relationships define a strict hierarchy; that is, recursion is not allowed.
In the event a physical entity is contained by more than one physical
entity (for example, double-wide modules), this object should identify
the containing entity with the lowest value of entPhysicalIndex.
Value 0 for chassis entry. All containers have ContainedIn set to 1. All
FRUs are contained in their respective slot container entries.
entPhysicalClass
1.3.6.1.2.1.47.1.1.1.1.5 Read only An indication of the general hardware type of the physical entity.
An agent should set this object to the standard enumeration value that
most accurately indicates the general class of the physical entity, or the
primary class if there is more than one.
If no appropriate standard registration identifier exists for this physical
entity, then the value
other (1) is returned. If the value is unknown by this agent, then the
value unknown (2) is returned.
Brocade 300 switches can have the following hierarchy of physical
objects:
•
Chassis: One entry (one row)
•
Container: One entry for each FRU slot (one blade, one power
supply, three fans)
•
Module: One entry for blades, one entry for power supply, and
three entries for fans
Brocade 5100 switches can have the following hierarchy of physical
objects:
•
Chassis: One entry (one row)
•
Container: One entry for each FRU slot (one blade, two power
supplies, two fans)
•
Module: One entry for blades, two entries for power supplies, and
two entries for fans
Brocade 5300 switches can have the following hierarchy of physical
objects:
•
Chassis: One entry (one row)
•
Container: One entry for each FRU slot (one blade, two power
supplies, three fans)
•
Module: One entry for blades, two entries for power supplies, and
three entries for fans
TABLE 39
Object and OID Access Description