Dell POWEREDGE M1000E - Manual (Page 236)

216 Fabric OS MIB Reference
53-1002750-01
Connectivity unit group
9
connUnitPortTransmitter
Type
1.3.6.1.3.94.1.10.1.8 Read only The technology of the port transceiver.
Possible values are:
•
unknown (1)
•
other (2)
•
unused (3)
•
shortwave (4)
•
longwave (5)
•
copper (6)
•
scsi (7)
•
longwaveNoOFC (8)
•
shortwaveNoOFC (9)
•
longwaveLED (10)
•
ssa (11) (Not supported in Fabric OS v2.6.1.)
For an external FC port, this value should be 9 (shortwaveNoOFC), 8
(longwaveNoOFC), or 6 (copper).
connUnitPortModuleType
1.3.6.1.3.94.1.10.1.9 Read only The module type of the port connector.
Possible values are:
•
unknown (1)
•
other (2)
•
gbic (3)
•
embedded (4) Fixed (oneXnine)
•
glm (5)
•
gbicSerialId (6)
•
gbicNoSerialId (7)
•
gbicNotInstalled (8)
•
smallFormFactor (9)
For an external FC port with GBIC, this value is set to 6 (gbicSerialId) or 7
(gbicNoSerialId). For an external FC port without GBIC, this value is set to
8 (gbicNotInstalled).
connUnitPortWwn
1.3.6.1.3.94.1.10.1.10 Read only The World Wide Name of the port, if applicable; otherwise, an empty
string.
This is in IEEE Extended format, and the extension contains the internal
port number of each port.
NOTE: The internal port number is 1 less than the port index. For
example, if the switch has WWN 10:00:00:60:69:10:02:18, then
port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and
20:06:00:60:69:10:02:18, respectively. However, the embedded
port has WWN 10:00:00:60:69:10:02:18, the same as the
switch.
TABLE 75
Object and OID Access Description