Dell POWEREDGE M1000E - Manual (Page 237)

Fabric OS MIB Reference 217
53-1002750-01
Connectivity unit group
9
connUnitPortFCId
1.3.6.1.3.94.1.10.1.11 Read only This is the assigned Fibre Channel ID of the port. If the port does not
have a Fibre Channel address, this object return all bits set to 1.
For an F_Port, this is the Fibre Channel ID to which the connected
N_Port is assigned. For an FL_Port, this is the Fibre Channel ID of the
FL_Port. For a U or E_Port, this is similar to F_Port.
The FC ID is formatted “DD AA PP” (for example, “02 00 02”). The
Brocade Access Gateway port FC ID differs from a Fibre Channel switch.
A Fibre Channel switch port FC ID has the same DD with a different AA
value for each link. The Brocade Access Gateway “PP” is the port
number for F_Ports and is always zero for N_Ports. Therefore the N_Port
FC ID always appears as “DD AA 00” (for example, “02 00 00”). On a
Brocade Access Gateway the FC ID of different ports can have the same
“AA” value but different “DD” values and vice versa.
connUnitPortSn
1.3.6.1.3.94.1.10.1.12 Read only The serial number of the unit (for example, for a GBIC). If this is not
applicable, return an empty string.
If the GBIC has a serial ID, the return value is the GBIC part number;
otherwise, the return value is Null.
connUnitPortRevision
1.3.6.1.3.94.1.10.1.13 Read only The port revision (for example, GBIC).
If the GBIC has a serial ID, this returns the GBIC revision number;
otherwise, it returns a Null value.
connUnitPortVendor
1.3.6.1.3.94.1.10.1.14 Read only The port vendor (for example, for a GBIC).
If the GBIC has a serial ID, this returns the GBIC vendor name;
otherwise, it returns a Null value.
connUnitPortSpeed
1.3.6.1.3.94.1.10.1.15 Read only The speed of the port, in kilobytes per second.
For example, the valid values for Brocade 12000, 24000, and 48000
directors: 250,000 KBps, 500,000 KBps, 1,000,000 KBps, 1,250,000
KBps, 2,000,000 KBps depending on the configuration.
TABLE 75
Object and OID Access Description