Dell POWEREDGE M1000E - Manual (Page 81)

Fabric OS MIB Reference 61
53-1002750-01
Statistics group
3
etherStatsBroadcastPkts
1.3.6.1.2.1.16.1.1.1.6 Read only The total number of good packets received that were directed to the
broadcast address.
NOTE: This number does not include multicast packets.
etherStatsMulticastPkts
1.3.6.1.2.1.16.1.1.1.7 Read only The total number of good packets received that were directed to a
multicast address.
NOTE: This number does not include packets directed to the broadcast
address.
etherStatsCRCAlignErrors
1.3.6.1.2.1.16.1.1.1.8 Read only The total number of packets received that had a length (excluding
framing bits, but including FCS octets) between 64 and 1518 octets,
inclusive, but had one of the following errors:
•
FCS error: A bad Frame Check Sequence (FCS) with an integral
number of octets.
•
Alignment error: A bad FCS with a non-integral number of octets.
etherStatsUndersizePkts
1.3.6.1.2.1.16.1.1.1.9 Read only The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise
well formed.
etherStatsOversizePkts
1.3.6.1.2.1.16.1.1.1.10 Read only The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise
well formed.
etherStatsFragments
1.3.6.1.2.1.16.1.1.1.11 Read only The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets) and had one of
the following errors:
•
FCS error: A bad FCS with an integral number of octets.
•
Alignment error: A bad FCS with a non-integral number of octets.
NOTE: It is entirely normal for etherStatsFragments to increment. This
is because it counts both runts (normal occurrences due to
collisions) and noise hits.
etherStatsJabbers
1.3.6.1.2.1.16.1.1.1.12 Read only The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had one of the
following errors:
•
FCS error: A bad FCS with an integral number of octets.
•
Alignment error: A bad FCS with a non-integral number of octets.
etherStatsCollisions
1.3.6.1.2.1.16.1.1.1.13 Read only The best estimate of the total number of collisions on this Ethernet
segment. The value returned will depend on the location of the RMON
probe.
etherStatsPkts64Octets
1.3.6.1.2.1.16.1.1.1.14 Read only The total number of packets (including bad packets) received that were
64 octets in length (excluding framing bits but including FCS octets).
etherStatsPkts65to127O
ctets
1.3.6.1.2.1.16.1.1.1.15 Read only The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
etherStatsPkts128to255
Octets
1.3.6.1.2.1.16.1.1.1.16 Read only The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits
but including FCS octets).
etherStatsPkts256to511
Octets
1.3.6.1.2.1.16.1.1.1.17 Read only The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits
but including FCS octets).
TABLE 19
Object and OID Access Description