Dell POWEREDGE M1000E - Manual (Page 314)

294 Fabric OS MIB Reference
53-1002750-01
LLDP-EXT-DOT1-MIB
16
lldpXdot1 local data group
lldpXdot1ConfigProtocol
Entry
1.0.8802.1.1.2.1.5.329
62.1.1.4.1 Not
accessible The LLDP configuration information that specifies the set of ports
(represented as a PortList) on which the Local System Protocol instance
will be transmitted.
lldpXdot1ConfigProtocolT
xEnable
1.0.8802.1.1.2.1.5.329
62.1.1.4.1.1 Read-write The boolean value that indicates whether the corresponding Local System
Protocol Identity instance will be transmitted on the port defined by the
given lldpXdot1LocProtocolEntry. The value of this object must be
restored from non-volatile storage after a re-initialization of the
management system.
TABLE 111
object and OID Access Description
lldpXdot1LocalData
1.0.8802.1.1.2.1.5.32962.
1.2 Not
accessible IEEE 802.1 local system information.
lldpXdot1LocTable
1.0.8802.1.1.2.1.5.32962.
1.2.1 Not
accessible This table contains one row per port for IEEE 802.1 organizationally
defined LLDP extension on the local system known to this agent.
lldpXdot1LocEntry
1.0.8802.1.1.2.1.5.32962.
1.2.1.1 Not
accessible The information about IEEE 802.1 organizationally defined LLDP
extension.
lldpXdot1LocPortVlanId
1.0.8802.1.1.2.1.5.32962.
1.2.1.1.1 Read only The integer value used to identify the port's VLAN identifier associated
with the local system. A value of zero shall be used if the system either
does not know the PVID or does not support port-based VLAN
operation. This object displays zero although the TE interfaces are
associated with VLANS.
NOTE: This object takes the value from the PVID sent by NSM. This
PVID is sent from NSM to LLDP only for the untagged frames.
Port VLAN ID or PVID, is used for classifying untagged packets.
For untagged VLAN it can be set in access port, or converged
port using the switchport [access | converged] vlan <vlan_id>
command. All the other VLANs which are tagged will display
zero.
lldpXdot1LocProtoVlanTable
1.0.8802.1.1.2.1.5.32962.
1.2.2 Not
accessible This table contains one or more rows per Port and Protocol VLAN
information about the local system.
lldpXdot1LocProtoVlanEntry
1.0.8802.1.1.2.1.5.32962.
1.2.2.1 Not
accessible The port and protocol VLAN ID Information about a particular port
component. There may be multiple port and protocol VLANs, identified
by a particular lldpXdot1LocProtoVlanId, configured on the given port.
lldpXdot1LocProtoVlanId
1.0.8802.1.1.2.1.5.32962.
1.2.2.1.1 Not
accessible The integer value used to identify the port and protocol VLANs
associated with the given port associated with the local system. A value
of zero shall be used if the system either does not know the protocol
VLAN ID (PPVID) or does not support port and protocol VLAN operation.
TABLE 110
object and OID Access Description