Connectivity unit group – Dell POWEREDGE M1000E User Manual

Page 224

Advertising
background image

204

Fabric OS MIB Reference

53-1002750-01

Connectivity unit group

9

Connectivity unit group

Implementation of the connectivity group is mandatory for all systems.

FcEventSeverity

Integer

1 (unknown)
2 (emergency) Emergency status.
3 (alert) Alert status.
4 (critical) Critical status.
5 (error) Error status.
6 (warning) Warning status.
7 (notify) Notification status.
8 (info) Informational status.
9 (debug) Debug status.
10 (mark) All messages logged.

FcUnitType

Integer

1 (unknown)
2 (other) None of 3–14.
3 (hub) Passive connectivity unit supporting loop protocol.
4 (switch) Active connectivity unit supporting multiple protocols.
5 (gateway) Unit that not only converts the interface but also encapsulates the frame into
another protocol. The assumption is that there are always two gateways connected together:
for example, FC <-> ATM.
6 (converter) Unit that converts from one interface to another: for example, FC <-> SCSI.
7 (hba) Host bus adapter.
8 (proxy-agent) Software proxy agent.
9 (storage-device) Disk, CD, tape, and so on.
10 (host) Host computer.
11 (storage-subsystem) For example, RAID, library.
12 (module) Subcomponent of a system.
13 (swdriver) Software driver.
14 (storage-access-device) Provides storage management and access for heterogeneous
hosts and heterogeneous devices.

TABLE 74

Definitions for FCMGMT-MIB (Continued)

Type definition

Value

Description

Advertising