Dell POWEREDGE M1000E - Manual (Page 253)

Fabric OS MIB Reference 233
53-1002750-01
Revision number scalar
9
Revision number scalar
Unsupported tables
The Connectivity Unit Port Statistics Fabric Table (connUnitPortStatTable) is supported in FOS
v2.6.1, v5.x, and v6.0 and later versions.
Brocade does not support the following:
• Connectivity Unit Port Statistics Hub Table
• Connectivity Unit Port Statistics SCSI Table
• Connectivity Unit Port Statistics LAN/WAN Table
TABLE 81 trapRegRowState for Read/Write
State Description (Read) Description (Write)
rowDestroy (1) Can never happen. Remove this row from the table.
rowInactive (2) Indicates that this row does exist but
that traps are not enabled to be sent
to the target. If the row does not exist and the agent allows writes to
the trap table, then a new row is created. The values of
the optional columns are set to default values. Traps
are not enabled to be sent to the target. If the row
already exists, then traps are disabled from being sent
to the target.
rowActive (3) Indicates that this row exists and that
traps are enabled to be sent to the
target. If the row does not exist and the agent allows writes to
the trap table, then a new row is created. The values of
the optional columns are set to default values. Traps
are enabled to be sent to the target. If the row already
exists, then traps are enabled to be sent to the target.
TABLE 82
Object and OID Access Description
revisionNumber
1.3.6.1.3.94.3 Read only This is the revision number for this MIB. The format of the revision
value is as follows:
0 = High order major revision number
1 = Low order major revision number
2 = High order minor revision number
3 = Low order minor revision number
The value is stored as an ASCII value. The following is the current
value of this object.
0 = 0
1 = 3
2 = 0
3 = 0
This defines a revision of 03.00.
Set to 0300.