Dell POWEREDGE M1000E - Manual (Page 319)

Fabric OS MIB Reference 299
53-1002750-01
LLDP-EXT-DOT3-MIB
16
lldpXdot3 configuration group
lldpXdot3 local data group
TABLE 113
object and OID Access Description
lldpXdot3Config
1.0.8802.1.1.2.1.5.4623.1.1 Not
accessible IEEE 802.3 configuration information.
lldpXdot3PortConfigTable
1.0.8802.1.1.2.1.5.4623.1.1.1 Not
accessible A table that controls selection of LLDP TLVs to be transmitted on
individual ports.
lldpXdot3PortConfigEntry
1.0.8802.1.1.2.1.5.4623.1.1.1.
1 Not
accessible The LLDP configuration information that controls the transmission
of IEEE 802.3 organizationally defined TLVs on LLDP transmission
capable ports.
lldpXdot3PortConfigTLVsTxEnabl
e
1.0.8802.1.1.2.1.5.4623.1.1.1.
1.1 Read-write The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP TLVs
whose transmission is allowed on the local LLDP agent by the
network management. Each bit in the bitmap corresponds to an
IEEE 802.3 subtype associated with a specific IEEE 802.3
optional TLV:
•
The bit macPhyConfigStatus (0) indicates that LLDP agent
should transmit MAC/PHY configuration or status TLV.
•
The bit powerViaMDI (1) indicates that LLDP agent should
transmit Power through MDI TLV.
•
The bit linkAggregation (2) indicates that LLDP agent should
transmit Link Aggregation TLV.
•
The bit maxFrameSize (3) indicates that LLDP agent should
transmit Maximum-frame-size TLV.
TABLE 114
object and OID Access Description
lldpXdot3LocalData
1.0.8802.1.1.2.1.5.462
3.1.2 Not
accessible IEEE 802.3 local device information.
lldpXdot3LocPortTable
1.0.8802.1.1.2.1.5.462
3.1.2.1 Not
accessible This table contains one row per port of Ethernet port information (as a
part of the LLDP 802.3 organizational extension) on the local system
known to this agent.
lldpXdot3LocPortEntry
1.0.8802.1.1.2.1.5.462
3.1.2.1.1 Not
accessible The information about a particular port component.
lldpXdot3LocPortAutoNe
gSupported
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.1 Read only The truth value used to indicate whether the given port (associated with
the local system) supports auto-negotiation.
lldpXdot3LocPortAutoNe
gEnabled
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.2 Read only The truth value used to indicate whether port auto-negotiation is enabled
on the given port associated with the local system.