Dell POWEREDGE M1000E - Manual (Page 190)

170 Fabric OS MIB Reference
53-1002750-01
Bloom performance monitor group
6
Bloom performance monitor group
swGroupMemWwn
1.3.6.1.4.1.1588.2.1.1.1.22.2.
1.2 Read only This object identifies the WWN of the member switch.
swGroupMemPos
1.3.6.1.4.1.1588.2.1.1.1.22.2.
1. Read only This object identifies the position of the member switch in the
group, based on the order that the switches were added in the
group.
NOTE: This object is obsolete.
TABLE 56
Object and OID Access Description
TABLE 57
Object and OID Access Description
swBlmPerfMnt
1.3.6.1.4.1.1588.2.1.1.1.23 Not
accessible The OID sub-tree for bloom performance monitor group.
swBlmPerfALPAMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.1 Not
accessible AL_PA monitoring counter table.
For the Brocade 4100, 12 filter monitors per port are supported.
swBlmPerfALPAMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1 Not
accessible AL_PA monitoring counter for given AL_PA.
swBlmPerfAlpaPort
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.1 Read only This object identifies the port index of the switch.
swBlmPerfAlpaIndx
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.2 Read only This object identifies the AL_PA index. There can be 126 AL_PA
values.
swBlmPerfAlpa
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.3 Read only This object identifies the AL_PA values. These values range between
x'01' and x'EF' (1 to 239). AL_PA value x'00' is reserved for FL_Port.
If Alpha device is invalid, then it will have -1 value.
swBlmPerfAlpaCRCCnt
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.4 Read only Get CRC count for given AL_PA and port. This monitoring provides
information on the number of CRC errors that occurred on the
frames destined to each possible AL_PA attached to a specific port.
For the Brocade 4100, this value will always be 0. CRC counters are
not supported on this platform.
swBlmPerfEEMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.2 Not
accessible End-to-end monitoring counter table.
swBlmPerfEEMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1 Not
accessible End-to-end monitoring counter for given port.
swBlmPerfEEPort
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.1 Read only This object identifies the port number of the switch.