Dell POWEREDGE M1000E - Manual (Page 174)

154 Fabric OS MIB Reference
53-1002750-01
Fibre Channel port group
6
swFCPortLinkState
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.6 Read-write Indicates the link state of the port. When the port's link state changes,
its operational status (swFCPortOpStatus) is affected.
Possible values are:
•
enabled (1) - The port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is in an FC-AL loop).
•
disabled (2) - The port is not allowed to participate in the FC-PH
protocol with its attached ports.
•
loopback (3) - The port might transmit frames through an internal
path to verify the health of the transmitter and receiver path.
swFCPortTxType
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.7 Read only Indicates the media transmitter type of the port.
Possible values are:
•
unknown (1) - Cannot determine the port driver.
•
lw (2) - Long wave laser.
•
sw (3) - Short wave laser.
•
ld (4) - Long wave LED.
•
cu (5) - Copper (electrical).
swFCPortTxWords
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.11 Read only Counts the number of Fibre Channel words that the port has
transmitted. You can convert words to bytes by multiplying this value
by 4.
swFCPortRxWords
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.12 Read only Counts the number of Fibre Channel words that the port has received.
You can convert words to bytes by multiplying this value by 4.
swFCPortTxFrames
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.13 Read only Counts the number of Fibre Channel frames that the port has
transmitted.
swFCPortRxFrames
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.14 Read only Counts the number of Fibre Channel frames that the port has
received.
swFCPortRxC2Frames
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.15 Read only Counts the number of Class 2 frames that the port has received.
swFCPortRxC3Frames
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.16 Read only Counts the number of Class 3 frames that the port has received.
swFCPortRxLCs
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.17 Read only Counts the number of link control frames that the port has received.
swFCPortRxMcasts
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.18 Read only Counts the number of multicast frames that the port has received.
swFCPortTooManyRdys
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.19 Read only Counts the number of times that RDYs exceeds the frames received.
swFCPortNoTxCredits
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.20 Read only Counts the number of times that the transmit credit has reached 0.
TABLE 50
Object and OID Access Description